%0 Journal Article %T Gears-Part I %A Relly Victoria V. Petrescu %A Raffaella Aversa %A Bilal Akash %A Ronald B. Bucinell %A Juan M. Corchado %A Filippo Berto %A MirMilad Mirsayar %A Antonio Apicella and Florian Ion T. Petrescu %J American Journal of Engineering and Applied Sciences %P 457-472 %@ 1941-7039 %D 2017 %R 10.3844/ajeassp.2017.457.472 %X The gears are today the most widespread and most frequently used mechanical transmissions, all over the world. They must be the factory on an industrial scale, everywhere and have a variety of uses, being extremely important for both the heavy machines of industrial buildings, as well as for domestic appliances, electronics, etc. meet the excessive size normal, big or even huge (used from ships, heavy machines or in energy), but also for the tools watches, or for devices of sizes micro. The work of front wishes to make an overview of the tools and then an introduction to the study of their general and a study customized for gears with fixed. The methods listed for the gears with fixed, can then be customized and used and the gears Planetary Drive (with axis elements). The work of the front and the original components, very much, such as: Geometry, forces, velocities, powers, outputs (gears), which form part of the actual dynamics of the mechanisms and also the most important criterion in respect of the performance of a mechanism. %K Kinematics %K Forces %K Velocities %K Powers %K Gears %K Effi ciency %K Geometry %K Synthesis %K Yield %U http://thescipub.com/abstract/10.3844/ajeassp.2017.457.472