%0 Journal Article %T The Effect of the Variation of the Downstream Region Distance and Butterfly Valve Angle on Flow Characteristics in a 90 Degree Bended Elbow %A Se Youl Won %A Jae Gon Lee %A Jun Seok Yang %J Modern Mechanical Engineering %P 133-143 %@ 2164-0181 %D 2014 %I Scientific Research Publishing %R 10.4236/mme.2014.43013 %X
This study presents the numerical evaluation about the impact of flow disturbance near the intrados and extrados regions of the 90 degree bended elbow using CFX for several practical cases where the 90 degree bended upward elbow is located in a proximity to the butterfly valve and the butterfly valve open angle is changed. For the change of a butterfly valve open angle from 60% to 100% and the increase of the distance between a valve and a 90 degree bended elbow, the effect of FAC (Flow-Accelerated Corrosion) in the 90 degree bended elbow may be neglected because the value and distribution of the velocity and shear stress is rapidly decreased comparing with the present status installed in an industry, and the data of 100% valve open (Case 3) and L/D ¡Ö 5 (Case 4) are very good agreement comparing with the reference data, L/D ¡Ö 8 (Case 2). The reasons are that flow already maintains a fully developed condition and a steady state in spite of less distance than the reference case, L/D = 8. Therefore, smooth flow fields have approached at a 90 degree bended elbow. Then, the effect of shear stress and vortex is hardly investigated around the intrados area of 90 degree bended elbow.
%K Flow Disturbance %K Shear Stress %K 90 Degree Bended Elbow %K Butterfly Valve %K FAC %U http://www.scirp.org/journal/PaperInformation.aspx?PaperID=49343