%0 Journal Article %T Dynamical flexibility of discretecontinuous vibrating mechatronic system %A A. Buchacz %J Journal of Achievements in Materials and Manufacturing Engineering %D 2008 %I World Academy of Materials and Manufacturing Engineering %X Purpose: The application of approximate method for solving the task of assignment the frequency-modal analysis and characteristics of flexibly vibrating mechatronic system, because for considered case of boundary conditions exact and approximate methods for the coordinates are equivalent.Design/methodology/approach: Formulate and solve the problem in the form of a set of differential equations of motion and state equations of the considered mechatronic model of an object Galerkin¡¯s method was used. The considered flexibly vibrating mechanical system is a continuous beam, clamped at one of its ends. An integral part of the mechatronic system is a transducer perfectly bonded to the beam surface.Findings: The parameters of the transducer exert an important influence on the values of natural frequencies and on the form of the characteristics of the discussed mechatronic system.Research limitations/implications: The linear mechanical subsystem and linear electrical subsystem of the mechatronic system were analyzed and the theory Euler-Bernoulli is used for the beam; however, this approach is sufficient for such systems.Practical implications: Global approach is presented in the domain of frequency spectrum analysis. The methods of analysis and the obtained results my give grounds for designing and investigating this type of mechatronic systems.Originality/value: The mechatronic system created from mechanical and electric subsystems with electromechanical bondage has been considered. This approach is different from those considered so far. %K Applied mechanics %K Beam %K Piezotransducer %K Galerkin¡¯s method %K Dynamical characteristic %U http://www.journalamme.org/papers_vol28_2/2827.pdf