%0 Journal Article
%T Experimental - theoretical study of axially compressed cold formed steel profiles
%A Be£¿evi£¿ Miroslav
%A Kukaras Danijel
%J Facta Universitatis Series : Architecture and Civil Engineering
%D 2011
%I University of Ni?
%R 10.2298/fuace1103367b
%X Analysis of axially compressed steel members made of cold formed profiles presented in this paper was conducted through both experimental and numerical methods. Numerical analysis was conducted by means of "PAK" finite element software designed for nonlinear static and dynamic analysis of structures. Results of numerical analysis included ultimate bearing capacity with corresponding middle section force-deflection graphs and buckling curves. Extensive experimental investigation were also concentrated on determination of bearing capacity and buckling curves. Experiments were conducted on five series with six specimens each for slenderness values of 50, 70, 90, 110 and 120. Compressed simply supported members were analyzed on Amsler Spherical pin support with unique electronical equipment and software. Besides determination of forcedeflection curves, strains were measured in 18 or 12 cross sections along the height of the members. Analysis included comparisons with results obtained by different authors in this field recently published in international journals. Special attention was dedicated to experiments conducted on high strength and stainless steel members.
%K axially compressed members
%K experimental analysis
%K numerical analysis
%K finite element method
%K buckling curves
%K carbon steel
%K cold formed profiles
%K stainless steel
%K high-strength steel
%U http://www.doiserbia.nb.rs/img/doi/0354-4605/2011/0354-46051103367B.pdf