%0 Journal Article
%T A rotary piezoelectric actuator using longitudinal and bending hybrid transducer
%A Yingxiang Liu
%A Xiaohui Yang
%A Weishan Chen
%A Junkao Liu
%J AIP Advances
%D 2012
%I AIP Publishing LLC
%R 10.1063/1.4766676
%X A rotary piezoelectric actuator using bolt-clamped type transducer with double driving feet is proposed in this study. The first-order longitudinal and fourth-order bending vibration modes are superimposed in the actuator to produce elliptical movements on the driving tips. Longitudinal PZT and bending PZT are clamped between the exponential shape horns and the flange by bolts. The vibration shape changes of the actuator are presented to give a clear explanation of its working principle. Several structural parameters of the exponential shape horn are selected and adjusted to accomplish the tuning process of the longitudinal and bending resonance frequencies. The input impedance and vibration characteristics are calculated by using FEM method; the gained results verify the feasibility of the proposed actuator. After the fabrication of a prototype, its vibration characteristics are measured by using a scanning laser Doppler vibrometer; the tested results are in good agreement with the FEM calculated results. The mechanical output performance experiments state that the prototype achieves a maximum speed of 129 r/min and a maximum torque of 1.5 Nm.
%U http://link.aip.org/link/doi/10.1063/1.4766676