A variable-feed hydrous-bioethanol fuel injector (VFHBFI) for retrofitted en-gine was designed and evaluated to provide a technology that would allow spark-ignition engines commonly used by farmers be fuelled with hydrous bio-ethanol from nipa. With this technology, farmers can make use of their farm resources to fuel their engines making them less dependent on imported fossil fuel. The VFHBFI consists of the following components: 1) Fuel tank; 2) DC pump; 3) Fuel line; 4) PWM switch; 5) Battery; and 6) Fuel injector. The tank is made of a stainless-steel cylinder with 2-liter capacity of hydrous bioethanol (95%). The DC pump that feeds alcohol fuel is a diaphragm-type operating on a 12-volt line. It is ran by a 16-AH gel-type battery and its pumpingrate is regulated by a 12-volt, 0.8-Amp PWM switch. The position of the switch and of the battery is dictated by the kind of machine to be powered. The fuel line that delivers the alcohol to the engine is made of an alcohol-resistant plastic hose. The VFHBFI was evaluated using a 6.5-hp spark-ignition Kenbo engine retrofitted to utilize hydrous bioethanol as fuel. The fuel feed rate was calibrated with the PWM switch setting. A micro-tiller and a pow-er-tiller-operated hauler were used in the evaluation. The forward speed of the power-tiller-operated hauler was also evaluated at varying load. Results showed that the VFHBFI performs satisfactorily as per design. The fuel feeding rate of the injector behaves linearly with the PWM switch setting. It was observed that smooth engine speed is achieved at medium to high PWM switch setting. Using the VFHBFI, a retrofitted-engine-driven micro-tiller successfully tilled a 1500 m2 farm making it ready for planting in 2 to 3 passes. The average amount of fuel consumed in tilling was 2.0 liters per hour, which is double than when using pure gasoline as fuel. Also using the VFHBFI, a retrofitted-engine-driven power-tiller hauler consumed an average of 1.6 liters of alcohol per km on a rough road. The forward speed of the hauler was observed declining with the increase in load. The socio-economic advantage of the technology is also discussed.
Cite this paper
Belonio, A. T. , Regalado, M. J. C. , Rafael, M. L. , Villota, K. C. and Castillo, P. R. (2019). Design and Performance Evaluation of a Variable-Feed Hydrous-Bioethanol Fuel Injector for Retrofitted Engine. Open Access Library Journal, 6, e5164. doi: http://dx.doi.org/10.4236/oalib.1105164.
Regalado, M.J.C., Belonio, A.T., Rafael, M.L., Villota, K.C., Castillo, P.R. and Gagelonia, E.C. (2017) Design, Testing, and Evaluation of Hy-drous Bioethanol Distiller for the Production of Fuel-Grade Alcohol from Nipa Sap (Nypa fruticans). 2017 Annual International Meeting of the American Society of Agricultural and Biological Engineers, Spokane, Washington, USA, 16-19 July 2017, 9 p.
Northrop, W. (2014) High Efficiency Enabled by Hydrous Ethanol Use in Dual-Fuel Engines. Agricultural Utilization Research Institute, University of Minnesota/Minnesota Corn, 12 p.
Tartakovsky, L., Baibikov, V. and Veinblat, M. (2013) Comparative Performance Analysis of SI Engine Fed by Ethanol and Methanol Reforming Products. SAE Inter-national, Troy, 13 p.
Nilaphai, O., Chuepeng, S., Thongchai, S., Suebwong, A. and Tongroon, M. (2016) Preliminary Study of Hydrous Ethanol as Fuel for a Spark Ignition Engine on Performance and Combustion. The Journal of Industrial Technology, 12, 27-36.
Curran, S. (2006) Retrofit of a Briggs & Stratton Small Engine to Run E85. Proceedings of the National Conference on Undergraduate Research, Asheville, 6-8 April 2006, 8 p.
Li, G., Zhang, Z., Fubing, Y., Pan, Z., Zhang, X., Dong, J. and Gao, X. (2013) A Novel Strategy for Hydrous-Ethanol Utilization: Demonstration of a Spark Ignition Engine Fueled with Hydrogen-Rich Fuel from an on Board Ethanol/Steam Reformer. International Journal of Hydrogen Energy, 38, 5936-5948. https://doi.org/10.1016/j.ijhydene.2013.03.008
Belonio, A.T., Regalado, M.J.C., Tado, N.M.C. and Sicat, E.V. (2014) Development of a Hydrous Ethanol Fuel Feeding Device for Spark-Ignition Engine. Journal of Technology Innovation in Renewable Energy, 3, 159-165. https://doi.org/10.6000/1929-6002.2014.03.04.1
