A
swellpacker has the advantages of high isolation reliability and good gas
migration resistance in open holes. This paper analyzed the contact pressure
and stress distribution of the downhole swellpacker, and optimized rubber
structure for various formations. 1) The research shows that thermal expansion
can better explain the expanding process of the rubber after adsorption of oil.
2) The maximum contact pressure occurs in the middle of rubber, and the sealing
effect of the packer increases exponentially with the length and thickness of
rubber. 3) The shear stress model established for various
formations indicates that the shear stress increases linearly with the contact
pressure. According to the formation nature in northeastern Sichuan of China, 4)
the optimum swellpacker rubber should be 18 mm
in thickness, and 1.173 m in length for sandstone formation, 1.402 m
for shale formation and 1.415 m for mudstone formation. 5) Stress
verification reveals that the rubber does not fail and can work safely in
downhole.
Cite this paper
Ma, M. , Jia, W. , Bu, Y. and Guo, S. (2014). Study on Rubber Seal Design of a Swellpacker in Oil Well Cementing. Open Access Library Journal, 1, e1082. doi: http://dx.doi.org/10.4236/oalib.1101082.
Noguera, J., Sierra, L. and Jorgensen, T. (2009) First Coiled Tubing Swellable-Packer Deployment
in the Middle East. SPE/ICoTA Coiled Tubing & Well
Intervention Conference and Exhibition, 31 March-1 April 2009, The Woodlands.
Kleverlaan, M., van Noort, R.H. and Jones, I. (2005) Deployment of Swelling Elastomer Packers in
Shell E&P. SPE/ IADC
Drilling Conference, 23-25 February 2005, Amsterdam.
Kennedy, G., Lawless, A. and Shaikh, K. (2005) The Use of Swell Packers as a Replacement and
Alternative to Cementing. SPE Annual Technical Conference and
Exhibition, 9-12 October 2005, Dallas.
Antonio, L. and Barrios, O. (2007) Swelling Packer Technology Eliminates Problems
in Difficult Zonal Isolation in Tight-Gas Reservoir Completion. Latin
American & Caribbean Petroleum Engineering Conference, 15-18 April
2007, Buenos Aires.
Mahrooqi, M.A., Hinai, G. and Marketz, F. (2007) Improved Well and Reservoir Management in
Horizontal Wells Using Swelling Elastomers. SPE Annual Technical Conference
and Exhibition, 11-14 November 2007, Anaheim.
Al-Yami, A.S., Awang, M.Z. and Al-Arfaj, M.K. (2008) Swelling Packers: Lab Testing and Field Application. International
Petroleum Technology Conference, 3-5 December 2008, Kuala Lumpur.
Helmy, M.W., Veselka, A. and Benish, T. (2006) Application of New Technology in the Completion
of ERD Wells. SPE
Russian Oil and Gas Technical Conference and Exhibition, 3-6 October 2006,
Moscow.
Wang, Q., Cao, A.-L. and Wang, P. (2003) Studies
on Preparation and Properties of Oil Swelling Rubber. Polymeric Materials Science & Engineering, 19, 206-208.
Du, C.Q., Li, S.M. and Lv, H.R. (2008) Numerical
Simulation and Structural Optimization of Stress for Packer Rubber. Fault-Block Oil & Gas Field, 15, 104-106.
Bu, Y.-H., Ma, M.-X.
and Li, J.-H.
(2011) Study on Sealing Property Judgement and
Structure Design Method of Packer. Lubrication
Engineering, 36, 75-78.