This study deals with the grinding of mill scale in
a laboratory ball mill for different milling time then briquetted by using 2% molasses
as a binder and investigates the effect of grinding of mill scale for different
time on the physicochemical properties and the reduction degree of the mill
scale briquettes via hydrogen. Diffusion process control equation was applied and the energy of activation was calculated = 28.33 kJ/mole.
Cite this paper
El-Hussiny, N. A. , Abdul-Wahab, H. H. , Ali, M. M. , Omar, A. A. , Shalabi, M. E. H. and Moharm, M. R. (2014). Effect of Grinding Time of Mill Scale on the Physicochemical Properties of Produced Briquettes and Its Reduction via Hydrogen. Open Access Library Journal, 1, e1016. doi: http://dx.doi.org/10.4236/oalib.1101016.
Benchiheub, O., Mechachti, S., Serrai, S. and Khalifa, M.G. (2010) Elaboration
of Iron Powder from Mill Scale. Journal of Materials and Environmental Science, 1, 267-276.
Camci, L., Aydin, S. and Arslan, C. (2002) Reduction of Iron Oxides in Solid Wastes Generated
by Steelworks. Turkish Journal of Engineering and Environmental
Sciences, 26,
37-44.
Martín, M.I., López, F.A., Rabanal, M.E. and Torralba, J.M. (2010) Production
of Sponge Iron Powder by Reduction of a By-Product of the Steelmaking Industry. PM2010
World Congress—Water Atomized Powders, v. 1.
Park, J.-W., Ahn, J.-C., Song, H., Park, K., Shin, H. and Ahn, J.-S. (2002) Reduction Characteristics of Oily
Hot Rolling Mill Sludge by Direct Reduced Iron Method. Resources, Conservation and Recycling, 34,
129-140. http://dx.doi.org/10.1016/S0921-3449(01)00098-2
Balaz, P.,
Takacs, L.,
Luxova, M.,
Godocikova, E. and Ficeriova, J. (2004) Mechanochemical Processing of Sulphidic Minerals. International Journal of Mineral Processing, 245,
S365-S371. http://dx.doi.org/10.1016/j.minpro.2004.07.007
Hu, H., Chen, Q., Yin, Z. and Zhang, P. (2003) Thermal Behaviors of Mechanically Activated Pyrites by Thermogravimetry
(TG). Thermochimica Acta, 398, 233-240. http://dx.doi.org/10.1016/S0040-6031(02)00390-8
Godocikova, E., Balaz, P. and Boldizarova, E. (2002)
Structural and Temperature Sensitivity of the
Chloride Leaching of Copper, Lead and Zinc from a Mechanically Activated
Complex Sulphide. Hydrometallurgy, 65, 83-93. http://dx.doi.org/10.1016/S0304-386X(02)00094-4
Maurice, D. and
Hawk, J.A. (1999) Ferric Chloride Leaching of a Mechanically Activated Pentlandite-Chalcopyrite
Concentrate. Hydrometallurgy, 52, 289-312. http://dx.doi.org/10.1016/S0304-386X(99)00021-3
Maurice, D. and Hawk, J.A. (1999) Simultaneous Autogenous Milling and Ferric Chloride Leaching of
Chalcopyrite. Hydrometallurgy, 51, 371-377. http://dx.doi.org/10.1016/S0304-386X(98)00088-7
Ficeriová, J., Baláz, P. and Boldizárová, E. (2005)
Combined Mechanochemical and Thiosulphate
Leaching of Silver from a Complex Sulphide Concentrate. International
Journal of Mineral Processing, 76, 260-265. http://dx.doi.org/10.1016/j.minpro.2005.01.005
Baláz, P., Boldizárová, E., Achimovicová, M. and Kammel, R. (2000)
Leaching and Dissolution of a Pentlandite Concentrate
Pretreated by Mechanical Activation. Hydrometallurgy, 57,
85-96. http://dx.doi.org/10.1016/S0304-386X(00)00102-X
Baláz, P., Ficeriová, J. and Leon, C.V. (2003) Silver Leaching from a Mechanochemically
Pretreated Complex Sulfide Concentrate. Hydrometallurgy, 70,
113-119. http://dx.doi.org/10.1016/S0304-386X(03)00051-3
Boldyrev, V.V. and Tkácová, K. (2000) Mechanochemistry of Solids:
Past, Present, and Prospects. Journal
of Materials Synthesis and Processing, 8, 121-132. http://dx.doi.org/10.1023/A:1011347706721
Steinike, U. and Tkácová, K. (2000) Mechanochemistry of Solids—Real Structure and
Reactivity. Journal of Materials Synthesis and Processing, 8, 197-203. http://dx.doi.org/10.1023/A:1011364110355
Karagedov, G.R. and Lyakhov, N.Z. (2003) Mechanochemical Grinding
of Inorganic Oxides. KONA
Powder and Particle Journal, 21, 76-86. http://dx.doi.org/10.14356/kona.2003011
Baláz, P.,
Huhn, H.J.,
Tkácová, K. and Heegn, H. (1988) Laugungsverhalten und physico-chemische Eigenschaften
von in unterschiedlichen Mullen vorbehandeltemchalkopyrite. Erzmetall, 41, 325-331.
Senna, M. (1983) Criteria of Activation of
Powdery Materials by a Preliminary Mechanical Treatment. KONA Powder
and Particle Journal, 1, 48-52. http://dx.doi.org/10.14356/kona.1983009
El-Hussiny N.A. and Shalabi,
M.E.H. (2011) A
Self-Reduced Intermediate Product from Iron and Steel Plant Waste Material
Using a Briquetting Process. Powder
Technology, 205, 217-223. http://dx.doi.org/10.1016/j.powtec.2010.09.017
Mangena, S.J. and Cann, V.M. (2007) Binderless Briquetting of Some Selected
South African Prime Coking, Blend Coking and Weathered Bituminous Coals and the
Effect of Coal Properties on Binderless Briquetting. International
Journal of Coal Geology, 71, 303-312. http://dx.doi.org/10.1016/j.coal.2006.11.001
Shalabi,
M.E.H. (1973) Kinetic
Reduction of El-Baharia Iron Ore and Its Sinter in Static Bed by Hydrogen.
El-Tabbin Metallurgical Institute for Higher Studies, Cairo.
Sayed, S.A., Khalifa, G.M., El-Faramawy, E.S.R. and Shalabi, M.E.H. (2002) Kinetic Reduction of Low Manganes Iron Ore by Hydrogen. Egyptian Journal of Chemistry, 45, 47-66
Sayed, S.A., Khalifa, M.G., El-Faramawy, E.S.R. and Shalabi, M.E.H. (2001) Reductions Kinetic of El-Baharia Iron Ore in a
Static Bed. Gospodarka Surowcami Mineranymi, 17, 241-245.
Shalabi,
M.E.H.,
Mohamed,
O.A., Abdel-Khalek, N.A. and El-Hussiny, N.A. (1997) The Influence of Reduced Sponge Iron Addition on
the Quality of Produced Iron Ore Sinter. Proceeding
of the XXIMPC, Aachen, 21-26 September 1997, 362-376.
El-Hussiny,
N.A., Abdel-Khalek, N.A., Morsi, M.B., Mohamed, O.A., Shalabi, M.E.H. and Baeka, A.M. (1996) Influence of Water Amount Added on the Sintering
Process of Egyptian Iron Ore. Gornictwo,
231, 93-115.
