oalib

Publish in OALib Journal

ISSN: 2333-9721

APC: Only $99

Submit

Any time

2020 ( 6 )

2019 ( 74 )

2018 ( 358 )

2017 ( 355 )

Custom range...

Search Results: 1 - 10 of 8785 matches for " fiber Fabry-Perot tunable filter "
All listed articles are free for downloading (OA Articles)
Page 1 /8785
Display every page Item
Recent developments in fiber optic spectral white-light interferometry
Yi Jiang,Wenhui Ding
Photonic Sensors , 2011, DOI: 10.1007/s13320-010-0014-z
Abstract: Recent developments in spectral white-light interferometry (WLI) are reviewed. Firstly, the techniques for obtaining optical spectrum are introduced. Secondly, some novel measurement techniques are reviewed, including the improved peak-to-peak WLI, improved wavelength-tracking WLI, Fourier transform WLI, and 3 × 3 coupler based WLI. Furthermore, a hybrid measurement for the intensity-type sensors, interferometric sensors, and fiber Bragg grating sensors is achieved. It is shown that these developments have assisted in the progress of WLI.
Recognition of Bragg Wavelength Disturbed by Time Delay of Fiber Length in Prepositive Tunable Filter  [PDF]
Chuan Li, Xiaoyong Chao, Yingna Li, Tao Xie, Zhengang Zhao, Xin Xiong
Optics and Photonics Journal (OPJ) , 2013, DOI: 10.4236/opj.2013.32B054
Abstract:

The wavelength shift in fiber Bragg grating does not depend directly on the total light levels, losses in the connecting fibers and couplers, or source power. However, if the tunable Fabry-Perot filter is place on the end of incident fiber, the detected time delay of modulation light is occurred due to the unmatch between the scanning time and light transmission time in the transmission fiber. Consequently, the detected peak wavelength shifts with the length of transmission fiber. Thus, the peak wavelength shift effect of Bragg reflective light transmitted in fiber with different fiber length can be obvious in the demodulator with a prepositive tunable Fabry-Perot filter. The experiment indicates the shift rates of 0.109 - 0.126 nm/km increase approximately linearly with the original peak wavelength of 1532.917 - 1560.300 nm at the fiber length of 0 - 6 km. To certify the consistency of measurement data, the criterion correction is introduced. By using the differential method of two fiber Bragg gratings with an optical path, the differential worth is compensated from the disturbance modulated by the time delay of fiber length.

Output characteristics of tunable fiber ring laser:modeling and experimentation
可调谐光纤环形腔激光器输出特性的理论与实验研究

Dong Xin-Yong,Zhao Chun-Liu,Guan Bai-Ou,Tan Hua-Yao,Yuan Shu-Zhong,Kai Gui-Yun,Dong Xiao-Yi,
董新永
,赵春柳,关柏鸥,谭华耀,袁树忠,开桂云,董孝义

物理学报 , 2002,
Abstract: 提出一种简单的理论模型,并通过数值模拟详细研究了可调谐光纤环形腔激光器的输出特性随掺铒光纤长度、输出耦合比、抽运功率、腔内损耗等参量的变化关系.理论分析得到,通过参量优化可以实现在铒离子增益范围内超过130nm带宽(1500—1630nm)的激光输出.实验获得了100nm带宽(15185—16185nm)的可调谐激光输出,激光器输出功率高,信噪比在大部分可调范围内高于60dB,实验结果与理论分析符合得较好
Swept Fiber Laser Based Fiber Optic Sensor Demodulator
基于扫描光纤激光器的光纤传感解调仪研究

WANG Xiao-na,WANG Qi,CHEN Le-hua,YU Qing-xu,
王晓娜
,王琦,陈乐华,于清旭

光子学报 , 2009,
Abstract: A fiber optic sensing demodulation system based on a swept fiber laser was reported.A HCN gas cell was adopted as an embedded wavelength calibrator for the swept laser.The relation between the scanning voltage applied to the fiber Fabry-Perot tunable filter (FF-PTF) and the lasing wavelength was given out by a three order nonlinear fitting.The scanning voltage and multi-channel spectroscopy signal from sensors were sampled simultaneously and calibrated in real time.The interrogation wavelength resolution of 1.4pm and the long term repeatability of 3.2 pm were achieved.Demodulation test results for FBG and F-P sensors show that the system is capable of measuring the reflected peak wavelength of FBG and cavity length of fiber EFPI sensor with high accuracy.
Study of tunable Fabry-Perot filter based on piezoelectric polymer film
基于压电聚合物薄膜可调谐Fabry-Perot滤波器的研究

Zhou Ke-Yu,Ye Hui,Zhen Hong-Yu,Yin Yi,Shen Wei-Dong,
周可余
,叶辉,甄红宇,尹伊,沈伟东

物理学报 , 2010,
Abstract: Tunable Fabry-Perot filter (FPF) has high practical value in optic communications. Piezoelectric copolymer P(VDF-TrFE) can be used as spacer material in FPF to obtain large tunability in wide range because of its great electrostrictive effect. The filter has been fabricated with the structure of DBR/electrode/spacer/electrode/DBR. The copolymer is partly etched at where the light traverses. The transmittance spectra have been studied. The resonant wavelengths have been modulated by applied voltage. The opti...
1.55μm Fabry-Perot Thermo-Optical Tunable Filter with Amorphous-Si as Cavity
1.55μm非晶硅热光F-P腔可调谐滤波器(英文)

Zuo Yuhua,Cai Xiao,Mao Rongwei,Huang Changjun,Cheng Buwen,Li Chuanbo,Luo Liping,Gao Junhua,Bai Yunxia,Jiang Lei,Ma Chaohua,Wang Liangchen,Yu Jinzhong,Wang Qiming,
左玉华
,蔡晓,毛容伟,黄昌俊,成步文,李传波,罗丽萍,高俊华,白云霞,姜磊,马朝华,王良臣,余金中,王启明

半导体学报 , 2003,
Abstract: 介绍了一种Si基热光Fabry Perot (F P)腔可调谐滤波器.F P腔由电子束蒸发的非晶硅构成.利用非晶硅的热光效应,通过对Si腔加热,改变F P腔的折射率,从而引起透射峰位的红移.该原型器件调谐范围为1 2nm ,透射峰的FWHM (峰值半高宽)为9nm ,加热效率约为0 1K/mW .精确控制DBR(分布式Bragg反射镜)生长获得高反射率镜面是减小带宽的有效途径;通过改进加热器所处位置及增强散热能力,有望进一步提高加热效率
Simulation of the Tuning Characteristics of 1.55μm MOEMS Tunable Optical Filters
1.55 μm MOEMS可调谐光滤波器调谐性能模拟

(State Key Laboratory on Integrated Optoelectroncis,Institute of Semiconductors,Chinese Academy of Sciences,Beijing,
左玉华
,毛容伟,王良臣,余金中,王启明

光子学报 , 2005,
Abstract: 建立了等效单层梁模型和一维集总模型,用经典力学理论和传输矩阵方法模拟了多层材件构成且具有四臂固支梁结构的1.55μm Si基MOEMS(Micro-Opto-Electro-Mechanical-Systems)可调谐滤波器的调谐特性,模拟调谐系数与实验结果吻合较好。
Linear FBG Temperature Sensor Interrogation with Fabry-Perot ITU Multi-wavelength Reference
Hyoung-Jun Park,Minho Song
Sensors , 2008, DOI: 10.3390/s8106769
Abstract: The equidistantly spaced multi-passbands of a Fabry-Perot ITU filter are used as an efficient multi-wavelength reference for fiber Bragg grating sensor demodulation. To compensate for the nonlinear wavelength tuning effect in the FBG sensor demodulator, a polynomial fitting algorithm was applied to the temporal peaks of the wavelength-scanned ITU filter. The fitted wavelength values are assigned to the peak locations of the FBG sensor reflections, obtaining constant accuracy, regardless of the wavelength scan range and frequency. A linearity error of about 0.18% against a reference thermocouple thermometer was obtained with the suggested method.
1.3μm Si-Based MOEMS Optical Tunable Filter with a Tuning Range of 90nm
具有90nm调谐范围的1.3μm Si基MOEMS可调谐光滤波器(英文)

Zuo Yuhua,Huang Changjun,Cheng Buwen,Cai Xiao,Mao Rongwei,Li Chuanbo,Luo Liping,Gao Junhua,Bai Yunxia,Jiang Lei,Ma Chaohua,Zhu Jialian,Wang Liangchen,Yu Jinzhong,Wang Qiming,
左玉华
,黄昌俊,成步文,蔡晓,毛容伟,李传波,罗丽萍,高俊华,白云霞,姜磊,马朝华,朱家廉,王良臣,余金中,王启明

半导体学报 , 2003,
Abstract: 利用表面微机械技术,成功制作了1.3μm Si基MOEMS可调谐光滤波器.原型器件在5 0 V的调谐电压下,调谐范围为90 nm.该技术可以用于制作1.3μm Si基可调谐光探测器.
Analysis of Liquid Crystal Tunable Febry-Perot Etalon Filters
液晶法布里-玻罗滤波器可调谐特性分析

(State Key Laboratory,
申溯
,何赛灵

光子学报 , 2005,
Abstract: The influence of the reflectance phase shift of the reflector on the peak wavelength in a liquid crystal Febry-Perot etalon (LCFPE) filter is discussed. In the tunable LCFPE filter, the peak wavelength is selected by adjusting the applied external voltage. The peak wavelength shifts due to the wavelength-dependent phase shift of the reflector. A set of simple formulas which can give quickly the phase shift are derived. The simulation results indicate that the reflective phase shift can not be ignored in the design of a LCFPE filter as it plays an important role in determining the peak wavelength and the applied voltage of the device. Using these formulas, a tunable LCFPE filter in the optical communication C-Band is designed.
Page 1 /8785
Display every page Item


Home
Copyright © 2008-2017 Open Access Library. All rights reserved.