oalib

Publish in OALib Journal

ISSN: 2333-9721

APC: Only $99

Submit

Any time

2020 ( 12 )

2019 ( 618 )

2018 ( 704 )

2017 ( 696 )

Custom range...

Search Results: 1 - 10 of 401289 matches for " Sobolak M. "
All listed articles are free for downloading (OA Articles)
Page 1 /401289
Display every page Item
Hybrid foundry patterns of bevel gears
Budzik G.,Markowski T.,Sobolak M.
Archives of Foundry Engineering , 2007,
Abstract: Possibilities of making hybrid foundry patterns of bevel gears for investment casting process are presented. Rapid prototyping of gears with complex tooth forms is possible with the use of modern methods. One of such methods is the stereo-lithography, where a pattern is obtained as a result of resin curing with laser beam. Patterns of that type are applicable in precision casting. Removing of stereo-lithographic pattern from foundry mould requires use of high temperatures. Resin burning would generate significant amounts of harmful gases. In case of a solid stereo-lithographic pattern, the pressure created during gas burning may cause the mould to crack. A gas volume reduction may be achieved by using patterns of honeycomb structure. However, this technique causes a significant worsening of accuracy of stereo-lithographic patterns in respect of their dimensions and shape. In cooperation with WSK PZL Rzeszów, the Machine Design Department of Rzeszow University of Technology carried out research on the design of hybrid stereo-lithographic patterns. Hybrid pattern consists of a section made by stereo-lithographic process and a section made of casting wax. The latter material is used for stereo-lithographic pattern filling and for mould gating system. The hybrid pattern process consists of two stages: wax melting and then the burn-out of stereolithographic pattern. Use of hybrid patterns reduces the costs of production of stereolithographic patterns. High dimensional accuracy remains preserved in this process.
Badania niektórych parametrów chodu pacjentów z chorob Parkinsona
Monika Sobolak, Przemys aw Minta
Physiotherapy , 2009, DOI: 10.2478/v10109-009-0041-8
Abstract: The aim of the paper was to evaluate chosen gait parameters in patients with the Parkinson's disease while walking on straight sections and slalom of a chosen route. The research covered two groups: the examination group numbering 17 patients with the Parkinson's disease (average age 71 years) and the control group including 17 healthy people (average age 70 years). The examination was based on covering a route consisting of straight sections and slaloms, designed according to the idea of the authors. Patients with the Parkinson's disease achieved worse results in comparison with healthy people of similar age, especially on the slalom distances.
Study of Duct Characteristics Deduced from Low Latitude Ground Observations of Day-Time Whistler at Jammu  [PDF]
M. Altaf, M. M. Ahmad
International Journal of Astronomy and Astrophysics (IJAA) , 2013, DOI: 10.4236/ijaa.2013.33032
Abstract:

Propagation characteristics of low latitude whistler duct characteristics have been investigated based on day-time measurements at Jammu. The morphogical characteristics of low latitude whistlers are discussed and compared with characteristics of middle and high latitude whistlers. The Max. electron density (Nm) at the height of the ionosphere obtained from whistler dispersion comes out to be higher than that of the background which is in accordance with the characteristics of whistler duct. The equivalent width is found to be close to the satellite observations and the characteristics of whistler duct in low latitude ionosphere are similar to those in middle and high latitude ionosphere. The width of ducts estimated from the diffuseness of the whistler track observed during magnetic storm is found to lie in the range of 50 - 200 Km.

Review Article: Immobilized Molecules Using Biomaterials and Nanobiotechnology  [PDF]
Magdy M. M. Elnashar
Journal of Biomaterials and Nanobiotechnology (JBNB) , 2010, DOI: 10.4236/jbnb.2010.11008
Abstract: Immobilized molecules using biomaterials and nanobiotechnology is a very interesting topic that touching almost all aspects of our life. It uses the sciences of biology, chemistry, physics, materials engineering and computer science to develop instruments and products that are at the cutting edge of some of today’s most promising scientific frontiers. In this review article, the author based on his experience in this arena has tried to focus on some of the supports for im-mobilization; the most important molecules to be immobilized such as DNA, cells, enzymes, metals, polysaccharides, etc and their applications in medicine, food, drug, water treatment, energy and even in aerospace. He specified a special section on what is new in the arena of supports and technologies used in enzyme immobilization and finally a recommendation by the author for future work with a special attention to up-to-date references.
Using of the generalized special relativity (GSR) in estimating the neutrino masses to explain the conversion of electron neutrinos  [PDF]
M. H. M. Hilo
Natural Science (NS) , 2011, DOI: 10.4236/ns.2011.34044
Abstract: In this work the Generalized Special Relativity (GSR) is utilized to estimate masses of some elementary particles such as, neutrinos. These results are found to be in conformity with experimental and theoretical data. The results obtained may explain some physical phenomena, such as, conversion of neutrinos from type to type when solar neutrino reaches the Earth.
Postischemic Lower Extremity Wounds Treated with and without Negative Pressure Dressing  [PDF]
Naz?mmü?
Surgical Science (SS) , 2012, DOI: 10.4236/ss.2012.37075
Abstract: Background: Vacuum-assisted dressing is a noninvasive closure system of the wound, which makes localized and controlled negative pressure. Its mechanical tension reduces edema, stimulates granulation tissue formation and angiogenesis, and prepares the wound bed for closure. In this study, a patient has been presented, who suffered from serious lower extremity wounds due to arterial emboli, one of her wounds has been treated with vacuum-assisted dressing and the other with conventional dressing to evaluate the efficacy of vacuum-assisted dressing in acute ischemic wounds. Methods: A 65-year-old female patient was admitted to the emergency clinic, due to complaint of severe pain in her right lower extremity which suggested an acute arterial occlusion. She immediately underwent an embolectomy operation; however, a few days later, severe ischemia on the leg and foot became appearant. All of the necrosis was sharply debrided under sterile conditions in the operating room, and then lower leg wound was covered with vacuum-assisted dressing, also calcaneal wound was dressed with silver sulphadiazine. Results: Eighteen days after the first dressing with negative pressure, distal leg wound became ready for closure, whereas, enough granulation tissue over the calcaneal area developed merely thirty-four days later. Calcaneal wound closed spontaneously within fifty-three days. Conclusions: When dealing with this experience, using the negative pressure dressing in patient with severe lower limb wounds following arterial emboli, accelerates wound healing by means of developing the granulation tissue, and rapidly prepares the wound for closure, so it may reduce the risk of amputation.
Laplace Transform Method for Unsteady Thin Film Flow of a Second Grade Fluid through a Porous Medium  [PDF]
M. Ali, M. Awais
Journal of Modern Physics (JMP) , 2014, DOI: 10.4236/jmp.2014.53017
Abstract:

In this article, we have effectively used the Numerical Inversion of Laplace transform to study the time-dependent thin film flow of a second grade fluid flowing down an inclined plane through a porous medium. The solution to the governing equation is obtained by using the standard Laplace transform. However, to transform the obtained solutions from Laplace space back to the original space, we have used the Numerical Inversion of Laplace transform. Graphical results have been presented to show the effects of different parameters involved and to show how the fluid flow evolves with time.

An Integral Collocation Approach Based on Legendre Polynomials for Solving Riccati, Logistic and Delay Differential Equations  [PDF]
M. M. Khader, A. M. S. Mahdy, M. M. Shehata
Applied Mathematics (AM) , 2014, DOI: 10.4236/am.2014.515228
Abstract:

In this paper, we propose and analyze some schemes of the integral collocation formulation based on Legendre polynomials. We implement these formulae to solve numerically Riccati, Logistic and delay differential equations with variable coefficients. The properties of the Legendre polynomials are used to reduce the proposed problems to the solution of non-linear system of algebraic equations using Newton iteration method. We give numerical results to satisfy the accuracy and the applicability of the proposed schemes.

ДОСЛ ДЖЕННЯ АНАЛ ТИЧНОГО МЕТОДУ ОЦ НЮВАННЯ ЙМОВ РНОСТ ПОТЕНЦ ЙНО КОНФЛ КТНИХ СИТУАЦ Й В ПОВ ТРЯНОМУ РУС The study of the analytical method of evaluating the probability of potential conflict situations in air traffic Исследование аналитического метода оценки вероятности потенциально конфликтных ситуаций в воздушном движении
В.M. Василь?в
Proceedings of National Aviation University , 2007,
Abstract: Розглянуто застосування запропонованого ран ше методу оц нювання ймов рност потенц йних конфл кт в для системи керування пов тряним рухом. Досл джено властивост методу, наведено проанал зовано результати комп’ютерного моделювання. Application of the method of potential conflicts probability evaluation offered before for air traffic control system is considered. The properties of the method are investigated, results of computer modeling are represented and analyzed. Рассмотрено применение предложенного ранее метода оценки вероятности потенциальных конфликтов для системы управления воздушным движением. Исследованы свойства метода, приведены и проанализированы результаты компьютерного моделирования.
МОДЕЛЮВАННЯ ТА УПРАВЛ ННЯ В БРОАКУСТИЧНИМ ВИПРОМ НЮВАННЯМ ОДНОР ДНО ПЛАСТИНИ П Д Д Ю ЗОВН ШН Х КОНЦЕНТРОВАНИХ СИЛ Modeling and management vibroacoustic emission homogeneous plate under the action of external forces concentrated Моделирование и управление виброакустическим излучением однородной пла
В.M. Макаренко
Proceedings of National Aviation University , 2009,
Abstract: Подано модель проведено досл дження акустичного випром нювання та поперечного руху прямокутно пластини. Розв’язок отримано на основ р внянь класично теор коливань пластини. Розглянуто в броакустичне випром нювання пластин з в льно обпертими граничними умовами. Як зовн шн збудження використано концентрован гармон чн сили. Встановлено законом рност зм ни звукового випром нювання залежно в д параметр в зовн шн х збуджень. Для перев рки анал тичого п дходу, використаного для розрахунк в, виконано експеримент. Власн частоти коливань в льно пластини, отриман анал тично, сп вв дносяться з результатами експерименту з малою похибкою. The model of rectangular plate acoustic radiation and transverse motion were presented, and its investigation was performed. The solution is received based on classisal plate theory. Vibration response and sound radiation of plates with simply-supported boundary conditions was discussed. Concentrated harmonic forces are used as an external excitation. The general confirmities to the law have been established for the changes of sound radiation, depending on the parameters of external excitations. An experiment was performed for justification of analytical approach, which is used for computations. Eigenfrequencies of free plate oscillations, which are received analytically, are in good agreement with experimental results. Представлены модель и проведены исследования акустического излучения и поперечного движения прямоугольной пластины. Решен
Page 1 /401289
Display every page Item


Home
Copyright © 2008-2017 Open Access Library. All rights reserved.