Publish in OALib Journal

ISSN: 2333-9721

APC: Only $99


Search Results: 1 - 10 of 856 matches for " Manish Wasamwar "
All listed articles are free for downloading (OA Articles)
Page 1 /856
Display every page Item
Herbs In Treatment Of Urinary Tract Infections
Manish Wasamwar,Vijay S.Wadha,Gopal S. Gond
Indian Streams Research Journal , 2012,
Abstract: It is known that urinary tract is very common source of infection and UTIs are second most common reason people visit their doctors each year. Escherichia coli is responsible for large majority of UTIs. UTIs is most commonly diagnosed bacterial infection in woman. Population at risk of complication include older woman, pregnant woman. Continuous antibiotics prophylaxis are used to treat and prevent recurrent urinary tract infections, frequent antibiotic use can result in vaginal and intestinal dysbiosis as well as antibiotic resistance. Thus, it is desirable to seek alternative methods of prevention and treatment of simple UTIs. Few herbal antimicrobial agents Vaccinium macrocarpon (Cranberry), Vaccinium myrtillus (Bilberry; Blueberry), Berberine, Arctostaphylos uva ursi (Bearberry) are proved to be very effective in preventing and treating urinary tract infections.
Ectopic Autosomal Dominant Polycystic Kidney Disease (ADPKD)—An Extremely Rare Radiological Finding  [PDF]
Manish Gupta
Open Journal of Radiology (OJRad) , 2014, DOI: 10.4236/ojrad.2014.41015

ADPKD is an inherited systemic disorder that predominantly affects the kidney, but may affect other organs including liver, pancreas, brain, and arterial blood vessel. APKPD occurs worldwide affecting about 1 in 500 - 1000 people. Hypertension is the most common manifestation of ADPKD and the major contributor to renal disease progression. A definite diagnosis of ADPKD relies on image testing. Renal ultrasound is commonly used because of its cost effectiveness.

New Single Input Multiple Output Type Current Mode Biquad Filter Using OTAs  [PDF]
Manish Gupta
Circuits and Systems (CS) , 2016, DOI: 10.4236/cs.2016.74022
Abstract: This paper presents a new current mode (CM) single-input and multi-output (SIMO)-type biquad using two multiple output OTAs and one current follower as an active device and having two grounded capacitors. This SIMO type circuit realizes all the five filter functions as low pass, band pass, high pass, band reject and all pass filter transfer functions simultaneously. This circuit has the unity gain transfer function for all the five types of filters. The circuit enjoys electronic tunability of angular frequency and bandwidth. The 0.18 μm TSMC technology process parameters have been utilized to test and verify the performance characteristics of the circuit using PSPICE. The sensitivity analysis, transient response and calculations of total harmonic distortion have also been shown.
Interpretation of water quality parameters for Villages of Sanganer Tehsil, by using Multivariate Statistical analysis  [PDF]
Yashbir Singh, Manish Kumar
Journal of Water Resource and Protection (JWARP) , 2010, DOI: 10.4236/jwarp.2010.210102
Abstract: In this study, the factor analysis techniques is applied to water quality data sets obtained from the Sanganer Tehsil, Jaipur District, Rajasthan (India). The data obtained were standardized and subjected to principal components analysis (PCA) extraction to simplifying its interpretation and to define the parameters responsible for the main variability in water quality for Sanganer Tehsil in Jaipur District. The PCA analysis resulted in two factors explaining more than 94.5% of the total variation in water quality data set. The first factor indicates the variation in water quality is due to anthropogenic sources and second factor shows variation in water quality due to organic sources that are taking place in the system. Finally the results of PCA reflect a good look on the water quality monitoring and interpretation of the surface water.
A Survey on the Stability of 2-D Discrete Systems Described by Fornasini-Marchesini Second Model  [PDF]
Manish Tiwari, Amit Dhawan
Circuits and Systems (CS) , 2012, DOI: 10.4236/cs.2012.31003
Abstract: A key issue of practical importance in the two-dimensional (2-D) discrete system is stability analysis. Linear state-space models describing 2-D discrete systems have been proposed by several researchers. A popular model, called Forna- sini-Marchesini (FM) second model was proposed by Fornasini and Marchesini in 1978. The aim of this paper is to present a survey of the existing literature on the stability of FM second model.
Robust Suboptimal Guaranteed Cost Control for 2-D Discrete Systems Described by Fornasini-Marchesini First Model  [PDF]
Manish Tiwari, Amit Dhawan
Journal of Signal and Information Processing (JSIP) , 2012, DOI: 10.4236/jsip.2012.32034
Abstract: This paper considers the guaranteed cost control problem for a class of two-dimensional (2-D) uncertain discrete systems described by the Fornasini-Marchesini (FM) first model with norm-bounded uncertainties. New linear matrix inequality (LMI) based characterizations are presented for the existence of static-state feedback guaranteed cost controller which guarantees not only the asymptotic stability of closed loop systems, but also an adequate performance bound over all the admissible parameter uncertainties. Moreover, a convex optimization problem is formulated to select the suboptimal guaranteed cost controller which minimizes the upper bound of the closed-loop cost function.
Bone Transport in Tibial Gap Non-Union—A Series of 25 Cases  [PDF]
Manish Kiran, Rabi Jee
Open Journal of Orthopedics (OJO) , 2012, DOI: 10.4236/ojo.2012.24027

Gap non-union of the tibia is frequently associated with deformity, infection and shortening. Ilizarov’s method of bone transport was used in the management of twenty-five cases of gap non-union of the tibia. The mean bone gap was 6.53 cm (range 4 to 12 cm). Union was achieved in all cases within a mean period of 11.12 months. The mean time taken for union, per centimeter of bone gap was found to be 1.7 months/cm. Pin tract infection was the commonest complication, seen in 9 cases (36%). The other complications encountered were neuropraxia (n = 3) deviation of the transported bone segment (n = 7), buckling of skin at the advancing side of bone (n = 4), traumatic corticotomy (n = 3), incomplete corticotomy (n = 1), equinus deformity (n = 4), knee stiffness (n

Mono-Therapy versus Poly-Therapy: Ten Years Indian Experience on Various Seizure Disorders  [PDF]
Deepak Goel, Manish Mittal
World Journal of Neuroscience (WJNS) , 2015, DOI: 10.4236/wjns.2015.55034
Abstract: Objectives: To find out prescription patterns and seizure freedom with different mono-, duo- and poly-therapies used in various seizure disorders in Indian setting. Material and Methods: Subjects with seizures, not responding to first antiepileptic drug, were evaluated prospectively for a period of 6 months. Patients on various dual antiepileptic drugs (AEDs) prescriptions were prospectively analyzed for 1) the pattern and frequency of different duo-therapies; 2) etiological profile of patients in duo-therapy prescription; and 3) frequency of seizure freedom on various duo-therapy groups. Results: Among 2542 patients, 293 (11.5%) lost in follow-up and thus, 2249 (88.5%) were followed. 1324 (58.9%) had seizure freedom on mono-therapy, 532 (23.7%) required duo-therapy and only 45 (2%) were better controlled on poly-therapy. Among the subjects, who were on mono-therapy, Carbamazepine/Oxcarbazepine was the most commonly prescribed in 1285 (50.55%) patients as first drug followed by Valproate compound and Phenytoin. The most common duo-therapy used was combination of Valproate with Lamotregine, followed by Phenytoin and Phenobarbitone. Other mono-therapy and combinations are given in this paper. Conclusions: Duo-therapy was required and found to be effective in 23.7% of Indian patients with epilepsy. Selection of appropriate two drug combination is based on individual approach and overall clinical profile of patient.
Wireless Power Transmission with Short and Long Range Using Inductive Coil  [PDF]
Manish Bhardwaj, Anil Ahlawat
Wireless Engineering and Technology (WET) , 2018, DOI: 10.4236/wet.2018.91001
Abstract: In today’s time each individual needs remote framework, yet at the same time control transmission for low power gadgets are wired in nature. Consistent power supply is one of the real issues in the motivation behind the utilization of remote sensor network. Yet, in the power arrangement of remote Sensor Network, the battery has an extremely constrained lifetime and is not supplanted yet by some other persistent power framework. There are separate techniques proposed for shorter and more separate power transmission: Inductive coupling, resonant inductive coupling and air ionization for short separations; microwave and Laser transmission for longer separations. The pioneer of the field, Tesla endeavoured to make a capable, remote electric transmitter more than a century back that has now observed an exponential development. This paper overall lights up all the effective strategies proposed for transmitting power without wires. This study is important for find out the future ways of power transmission. These methods are so important in today’s world because of drastic wastage of power. Common wireless power transmission is a point-to-point control transmission. It was demonstrated that the power transmission effectiveness could approach near 100%.
An Integrated Geometric Modeling Methodology for 2.5D Cylindrical Prismatic Part for Computer Aided Process Planning  [PDF]
Viswa Mohan Pedagopu, Manish Kumar
Intelligent Control and Automation (ICA) , 2014, DOI: 10.4236/ica.2014.54020
Abstract: The field of solid modeling has created numerous techniques for unambiguous computer representations of three-dimensional objects. Its data structures and algorithms have been used in a broad range of applications: Computer-Aided Design and Computer-Aided Manufacturing (CAD/ CAM), robotics, computer vision, computer graphics and visualization, virtual reality, etc. This research paper is used to generate process plan from feature-based modeling, based on an integrated geometric modeling system that supports both feature-based modeling and information storage. Present system is developed only for milling components and limited to selective machining features for prismatic components and further implemented for more machining features to develop algorithms for modeling the components through the input of machining features. As a result, feature information is directly available to downstream activities, and feature extraction is no longer needed. The various systematic steps involved in this approach are study of Design, identification of Features, selection of Processes, Tools and Machines, Machining and Inspection [DFPTMMI]. Machining features generated in the design stage are recognized and stored under the Visual Basic control of CATIA software ActiveX interface. Algorithms are developed for individual features and these algorithms are embedded in Visual Basic forms. This system is discussed and suited for 2.5 Dimensional part approach, however, that can be extended to 3 dimensional prismatic part and complex features machining. Finally a process planning chart has been presented as a model process planning.
Page 1 /856
Display every page Item

Copyright © 2008-2017 Open Access Library. All rights reserved.