All Title Author
Keywords Abstract


Finite Element Simulation of Thermal Field in Double Wire Welding

DOI: 10.4236/msce.2016.412002, PP. 10-21

Keywords: Temperature Field, Double Wire Welding, Numerical Simulation, Characteristic Parameter of Thermal Cycling

Full-Text   Cite this paper   Add to My Lib

Abstract:

In this paper, the thermal field of double wire welding is simulated by using ANSYS software. Simulation results were shown that the total heat input (E) is the most significant parameters to change the value of t8/5; By the mean of rationally controlling the proportion of the front arc heat input (E1) in the total heat input (E) and appropriately selecting double wire spacing (L), It is effective means to get the double wire welding thermal cycle. By the way of simulation, it is possible to manage the thermal input in the double welding wires and to control the temperature field and cooling rate that are fundamental for the final joint quality, it is great importance guidance to optimize the double wire welding process parameters.

References

[1]  Yang, X.Z., Tang, Z.M., Yu, S.F., et al. (2010) About the Calculation of Double Wire Welding Temperature Field of Improvement Algorithm Program Design. Journal of Welding, 53-56.
[2]  Yang, X.Z., Yu, S.F., Yao, R.G., et al. (2010) Double Moving Heat Source of Heat Flow Value of Efficiency Calculation and Load. Journal of the Hua Zhong University of Science and Technology, 101-104.
[3]  Mo, C.L., Qian, B.N., Guo, X.M., et al. (2001) The Research Progress of Welding Heat Source Computing Model. Journal of Welding, 6, 94-97.
[4]  Zhao, P.C., Wu, C.S. and Zhang, Y.M. (2004) Numerical Simulation of the Dynamic Characteristic of Weld Pool Geometry with Step Changes of Welding Parameters. Modeling and Simulation in Materials Science and Engineering, 765-780.
[5]  Wu, C.S., Chen, J. and Zhang, Y.M. (2007) Numerical Analysis of Both Front- and Back-Side Deformation of Fully-Penetrated GTAW Weld Pool Surfaces. Computational Ma-terials Science, 4, 635-642.
[6]  Turna, M., Taraba, B., Ambroz, P., et al. (2011) Contribution to Numerical Simulation of Laser Welding. Physics Procedia, 12, 638-645.
[7]  Ranjbarnodeh, E., Kokabi A.H. and Fischer, A. (2011) Effect of Welding Parameters on Residual Stresses in Dissimilar Joint of Stainless Steel to Carbon Steel. Journal of Materials Science, 46, 3225-3232.
[8]  Eagar, B.W. and Tsai, N.S. (2012) Temperature Fields Produced by Traveling Distributed Heat Sources. Welding Research Supplement.

Full-Text

comments powered by Disqus