All Title Author
Keywords Abstract

金属学报  2005 

楔横轧轴类件热变形时奥氏体微观组织演变的预测

, PP. 118-122

Keywords: 40Cr钢,楔横轧,有限元法,微观组织演变

Full-Text   Cite this paper   Add to My Lib

Abstract:

运用Gleeble--3500热模拟实验机对轴类件用钢40Cr高温热变形的组织形态进行研究,并由金相分析数据回归得出高温奥氏体组织演变数学模型.然后利用非线性有限元法建立了金属成形过程中热、应力、组织相互耦合的刚塑性有限元模型.采用该模型对二辊楔横轧成形工艺进行仿真计算,得出了轧后工件的温度场、变形场、高温奥氏体晶粒尺寸分布等.对比轧后工件奥氏体组织分布的计算结果与实测值可知,两者吻合良好.

References

[1]  Du F S, Li X T, Wang M T. Chin J Mech Eng, 2002; 38:231(杜凤山,李学通,王敏婷.机械工程学报, 2002;38:231)
[2]  Poliak E I, Jonas J J. ISIJ Int, 2003; 43(5): 684
[3]  Balance J B. The Deformation of Austenite. AIME, 1977: 36
[4]  Sellars C M. ISIJ Int, 1999; 39(4): 26
[5]  Hu Z H, Zhang K S, Wang B Y, Zhang W. Cross-Wedge Rolling Theory and Application. Beijing: Metallurgical Industry Press, 1996: 20(胡正寰,张康生,王宝雨,张巍.楔横轧理论与应用.北京:冶金工业出版社, 1996:20)
[6]  Fu X P. Int J Mach Tools Manuf, 1993; 33(3): 367
[7]  Pater Z. J Mater Process Technol, 1999; (92-93): 468
[8]  Li Q, Michael R Lovell. J Tribology, 2003; 125: 200
[9]  Li Q, Michael R Lovell, Deng Z. Soc Manuf Eng, 2001: 9
[10]  Dong Y M, Kaveh A Tagavi, Michael R Lovell. J MaterProcess Technol, 2000; 97: 44
[11]  Zhang K S, Hu Z H. Forging Technol, 1996; 4: 30(张康生,胡正寰.锻压技术, 1996;4:30)
[12]  Feng J C, Zhang W, Hu Z H. J Plast Eng, 1995; 2(1): 61(冯建春,张巍,胡正寰.塑性工程学报, 1995;2(1):61)
[13]  Hu Z H. Forging Technol, 1995; 5: 25(胡正寰.锻压技术, 1995;5:25)
[14]  Fang G, Lei L P, Zeng P. J Mater Process Technol, 2002;129: 245
[15]  Dong Y M, Kaveh A Tagavi, Michael R Lovell. Int J MechSci, 2000; 42: 1233
[16]  Roberts G. Met Sci, 1979; 13(2): 94I

Full-Text

comments powered by Disqus