All Title Author
Keywords Abstract

电网技术  2015 

高压直流电缆终端载流量确定方法

DOI: 10.13335/j.1000-3673.pst.2015.09.022, PP. 2519-2525

Keywords: 高压直流,电缆终端,稳态温度分布,载流量,影响因素

Full-Text   Cite this paper   Add to My Lib

Abstract:

高压直流电缆终端载流量与其稳态温度分布之间存在密切联系,为了研究载流量的准确计算问题,提出了一种基于迭代方法和ANSYS仿真软件的高压直流电缆终端载流量确定方法,以线芯最高长期允许温度和XLPE绝缘层、硅橡胶绝缘层径向最大允许温差作为限流条件;通过对比分析了未使用迭代方法和使用迭代方法时载流量的决定因素(线芯最高允许温度和XLPE绝缘层最大温差)随线芯载流变化情况,以及终端绝缘限制最大温差和终端最外层绝缘温度变化对其载流量的影响。研究结果表明采取该方法进行载流量计算是必要且可行的。

References

[1]  贾志东,范伟男,袁野,等.基于温升试验的10 kV交联聚乙烯电缆冷缩终端热分析[J].高电压技术,2014,40(3):795-800.Jia Zhidong,Fan Weinan,Yuan Ye,et al.Thermal analysis of cold-shrinkable terminal joint of 10 kV XLPE based on temperature-2 rise tests[J].High Voltage Engineering,2014,40(3):795-800(in Chinese).
[2]  叶充.电缆特性与过负荷保护分析[J].建筑电气,2012,31(1):14-19.Ye Chong.Analysis on cable characteristics and its overload protection[J].Bulding Electricity,2012,31(1):14-19(in Chinese).
[3]  罗俊华,周作春,李华春,等.电力电缆线路运行温度在线检测技术应用研究[J].高电压技术,2007,33(1):169-172.Luo Junhua,Zhou Zuochun,Li Huachun,et al.Application of operation temperature detection technique for on-line power cable lines[J].High Voltage Engineering,2007,33(1):169-172(in Chinese).
[4]  IEC 60287—1.Calculation of the current rating-part 1:current rating equations (100% load factor) and calculation of losses[S].Switzerland:International Electrotechnical Commission,2001.
[5]  IEC 60287—2.Calculation of the current rating-part 2:thermal resistance[S].Switzerland:International Electrotechnical Commission,2001.
[6]  IEC 60287—3,Calculation of the current rating-part 3:sections on operating conditions[S].Switzerland:International Electrotechnical Commission,1999.
[7]  Neher J H,Mcgrath M H.The calculation of the temperature rise and load capability of cable systems[J].Power Apparatus and Systems,Part III.Transactions of the American Institute of Electrical Engineers,1957,76(3):752-764.
[8]  牛海清,王晓兵,张尧.基于迭代法的单芯电缆载流量的研究[J].高电压技术,2006,32(11):41-44.Niu Haiqing,Wang Xiaobing,Zhang Yao.Study of ampacity of single-core cable based on iterative method[J].High Voltage Engineering,2006,32(11):41-44(in Chinese).
[9]  赵健康,雷清泉,王晓兵,等.复杂运行条件下交联电缆载流量研究[J].高电压技术,2009,35(12):3123-3128.Zhao Jiankang,Lei Qingquan,Wang Xiaobing,et al.Experimental research on ampacity of extruded power cable under complex operating condition[J].High Voltage Engineering,2009,35(12):3123-3128(in Chinese).
[10]  付永长,张文斌,陈涛,等.不规则排列电缆温度场及载流量计算[J].电网技术.2010,34(4):173-176.Fu Yongchang,Zhang Wenbin,Chen Tao,et al.Calculation on temperature field and current-carrying capacity of irregularly arranged cables[J].Power System Technology,2010,34(4):173-176(in Chinese).
[11]  郑良华,于建立,周晓虎,等.直埋电缆群载流量和稳态温度场计算新方法[J].高电压技术,2010,36(11):2833-2837.Zheng Lianghua,Yu Jianli,Zhou Xiaohu,et al.New method to calculate ampacity and the steady-state temperature field of direct buried cable system[J].High Voltage Engineering,2010,36(11):2833-2837(in Chinese).
[12]  梁永春,王忠杰,刘建业,等.排管敷设电缆群温度场和载流量数值计算[J].高电压技术,2010,36(3):763-768.Liang Yongchun,Wang Zhongjie,Liu Jianye,et al.Numerical calculation of temperature field a d ampacity of cables in ducts[J].High Voltage Engineering,2010,36(3):763-768(Chinese).
[13]  李新平,刘守功,曹晓珑,等.高压电缆终端结构设计的进展[J].电线电缆,2002,3(6):11-14.Li Xinping,Liu Shougong,Cao Xiaolong,et al.Development in the design of HV cable termination[J].Electric Wire &Cable,2002,3(6):11-14(in Chinese).
[14]  王佩龙,李凤兰.电缆附件的稳态热性计算[J].电线电缆,1980,33(6):23-26.Li Peilong,Li Fenglan.Steady state thermal calculation of cable accessories[J].Electric Wire &Cable,1980,33(6):23-26(in Chinese).
[15]  成永红,衣立东,谢恒.电缆终端热分布的数值计算[J].高电压技术,1997,23(3):10-12.Cheng Yonghong,Yi Lidong,Xie Heng.Numerical calculation of temperature distribution in power cable terminal[J].High Voltage Engineering,1997,23(3):10-12(in Chinese).
[16]  成永红,衣立东,程锡圭,等.运行状态下电缆终端热分布试验研究[J].高电压技术,1996,22(3):56-58.Cheng Yonghong,Yi Lidong,Cheng Xigui,et al.The experiment and research on thermal distribution of cable terminal in service[J].High Voltage Engineering,1996,22(3):56-58(in Chinese).
[17]  吴畏.基于等效电容法的电缆附件电场-温度场耦合分析研究[D].长沙:湖南大学,2011.
[18]  吴锴,朱庆东,陈曦,等.温度梯度效应对油纸绝缘材料空间电荷分布特性的影响[J].高电压技术,2011,37(4):823-827.Wu Kai,Zhu Qingdong,Chen Xi,et al.Effect of temperature gradient on space charge distribution in oil impregnated papers[J].High Voltage Engineering,2011,37(4):823-827(in Chinese).
[19]  王霞,刘霞,郑明波,等.温度梯度场下硅橡胶与交联聚乙烯界面上空间电荷的形成机理[J].高电压技术,2011,37(10):2424-2430.Wang Xia,Liu Xia,Zheng Mingbo,et al.Formation mechanism of space charge accumulation at SR and XLPE interface under temperature gradient[J].High Voltage Engineering,2011,37(10):2424-2430(in Chinese).
[20]  韩宝忠,傅明利,李春阳,等.硅橡胶电导特性对XLPE绝缘高压直流电缆终端电场分布的影响[J].高电压技术,2014,40(9): 2627-2634.Han Baozhong,Fu Mingli,Li Chunyang,et al.Effect of silicone rubber’s electric conductance characteristic on electric field distribution inside XLPE insulated HVDC cable terminal[J].High Voltage Engineering,2014,40(9):2627-263(in Chinese).
[21]  Chu D,Weedy B M.HVDC extruded cables-parameters for determination of stress[J].IEEE Transactions on Power Apparatus and Systems,1984,103(3):662-667.
[22]  齐玉,高压复合绝缘穿墙套管和电缆终端电场仿真及优化设计[D].北京:华北电力大学,2004.

Full-Text

comments powered by Disqus