All Title Author
Keywords Abstract


深凹槽式涡轮叶顶间隙泄漏直列叶栅实验研究

Keywords: 深凹槽,间隙间隙流动,涡轮,实验研究

Full-Text   Cite this paper   Add to My Lib

Abstract:

在低速风洞实验台,对具有不同深凹槽结构平面叶栅在不同间隙尺度条件下的流动特性进行了实验研究。实验采用五孔气动探针和高灵敏度及高精度的压力扫描阀测量了叶栅出口截面的气动参数,对比分析了总压损失的展向分布,并在叶栅端壁和叶片表面进行墨迹显示。结果表明,深凹槽式叶顶结构应用于本文研究的叶栅上是可行的。深凹槽尾缘开口有利于降低叶顶间隙泄漏损失,凹槽前缘开口对前缘附近局部流动产生一定影响。对整个流动通道涡生成影响不如泄漏流作用强,并且尾缘开口与前缘开口开度的匹配对叶顶间隙泄漏损失有明显的影响。

References

[1]  Booth T C, Dodge P R, Hepworth H K. Rotor-Tip Leakage:Part I---Basic Methodology [J]. Journal of Engineering for Gas Turbines and Power, 1982, 104(1): 154--161
[2]  Moore J, Tilton J S. Tip Leakage Flow in a Linear Turbine Cascade [J]. Journal of turbomachinery, 1988, 110(1): 18--26
[3]  Camci, Cengiz, Debashis Dey, Levent Kavurmacioglu. Tip Leakage Flows Near Partial Squealer Rims in an Axial Flow Turbine Stage [C]// ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference. American Society of Mechanical Engineers, 2003
[4]  Nho Y C, Lee Y J, Kwak J S. Effects of Tip Shape on the Gas Turbine Blade Tip Heat Transfer [J]. Journal of Thermophysics and Heat Transfer, 2012, 26(2): 305--312
[5]  Lee S W, Chae B J. Effects of Squealer Rim Height on Aerodynamic Losses Downstream of a High-Turning Turbine Rotor Blade [J]. Experimental Thermal and Fluid Science, 2008, 32(8):1440--1447
[6]  杨佃亮, 丰镇平. 凹槽对动叶顶部流动和换热的影响 [J].工程热物理学报, 2007, 28(6): 936--938 浏览
[7]  Yang Dian-Liang, Feng Zhen-Ping. Study on tip Leakage Flow and Transfer for a Squealer tip Blade [J]. Journal of Engineering Thermophysics, 2007, 28(6): 936--938 浏览
[8]  钟兢军. 弯曲叶片控制扩压叶栅二次流动的实验研究 [D].哈尔滨: 哈尔滨工业大学, 1995
[9]  Zhong Jing-Jun. An Experimental Investgation By Using Curved Blade to Control Secondary Flow In Compressor Cascade [D]. Harbin:Harbin Institute of Technology, 1995
[10]  Denton J D. The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines [J]. Journal of Turbomachinery, 1993,115(4): 621--656

Full-Text

comments powered by Disqus