All Title Author
Keywords Abstract


一种新型自粘接预浸料-Nomex蜂窝板面-芯结合强度关键影响因素试验研究

, PP. 156-162

Keywords: 复合材料,蜂窝夹层结构,共固化工艺,剥离强度,滚筒剥离

Full-Text   Cite this paper   Add to My Lib

Abstract:

以Nomex蜂窝和新型自粘接预浸料作为试验材料,通过采用均压板的共固化工艺制备蜂窝夹层板。采用滚筒剥离方法测试其面-芯结合性能,采用电子显微镜等方法观察其蒙皮-蜂窝粘接面、剥离后蒙皮表面结构及蜂窝壁端面的微观形态,并测试了蜂窝壁厚度与蜂窝壁浸渍的树脂成分。结合以上测试结果研究了在采用均压板的制备过程中工艺参数和蜂窝特征对蜂窝夹层板面-芯结合强度的影响规律,并考察了蜂窝夹层板的粘接形式。结果表明:在采用均压板模具的共固化工艺中,一定的升温速率范围内,蜂窝板的面-芯结合强度随着升温速率的减小而增大;而加压时机对蜂窝板的面-芯结合强度的大小没有明显的影响;蜂窝壁端面越粗糙、蜂窝壁树脂层厚度越小,夹层板的面-芯结合强度越好。

References

[1]  Abbadi A, Koutsawa Y, Carmasol A. Experimental and numerical characterization of honeycomb sandwich composite panels[J]. Simulation Modelling Practice and Theory, 2009, 17(10): 1533-1547.
[2]  Aktay L, Johnson A F, Kr?plin B H. Numerical modelling of honeycomb core crush behavior[J]. Engineering Fracture Mechanics, 2008, 75(9): 2616-2630.
[3]  Othman A R, Barton D C. Failure initiation and propagation characteristics of honeycomb sandwich composites[J]. Composite Structures, 2008, 85(2): 126-138.
[4]  Heimbs S, Schmeer S, Middendorf P. Strain rate effects in phenolic composites and phenolic-inpregnated honeycomb structures[J]. Composites Science and Technology, 2007, 67(13): 2827-2837.
[5]  郭兴旺, 许文浩. 复合材料蜂窝板脉冲热像检测和调制热像检测的比较研究[J].复合材料学报, 2012, 29(2): 172-180. Guo Xingwang, Xu Wenhao. Comparative study on pulsed thermography and modulated thermography of composite honeycomb panels[J]. Acta Materiae Compositae Sinica, 2012, 29(2): 172-180.
[6]  Giglio M, Manes A, Gilioli A. Investigations on sandwich core properties through an experimental-numerical approach[J]. Composites Part B, 2012, 43(2): 361-376.
[7]  Grove S M, Popham E, Miles M E. An investigation of the skin/core bond in honeycomb sandwich structures using statistical experimentation techniques[J]. Composites Part A, 2006, 37(5): 804-812.
[8]  原崇新, 李 敏, 顾轶卓. 蜂窝夹层结构真空袋共固化工艺过程试验研究[J]. 复合材料学报, 2008, 25(2): 57-62. Yuan Chongxin, Li Min, Gu Yizhuo. Experimental study of the cocure process with the vacuum bag method for honeycomb sandwich structure[J]. Acta Materiae Compositae Sinica, 2008, 25(2): 57-62.
[9]  Tavares S S, Caillet-Bois N, Michaud V. Vacuum-bag processing of sandwich structures: Role of honeycomb pressure level on skin-core adhesion and skin quality[J]. Composites Science and Technology, 2010, 70(5): 797-803.
[10]  Choi H S, Jang Y H. Bondline strength evaluation of cocure/procured honeycomb sandwich structures under aircraft hygro and repair environments[J]. Composites Part A, 2010, 41(9): 1138-1147.
[11]  Rion J, Leterrier Y, Mnson J E. Prediction of the adhesive fillet size for skin to honeycomb core bonding in ultra-light sandwich structures[J]. Composites Part A, 2008, 39(9): 1547-1555.
[12]  Okada R, Kortschot M T. The role of the resin fillet in the delamination of honeycomb sandwich structures[J]. Composites Science and Technology, 2002, 62(14): 1811-1819.
[13]  杨宝林, 顾 军, 郑 涛. 泥饼厚度对固井二界面胶接强度的影响[J]. 钻井液与完井液, 2009, 26(1): 43-46. Yang Baolin, Gu Jun, Zheng Tao. The influnences of mud cake thickness on bonding strength of the cement-formation interface[J]. Drilling Fluid & Completion Fluid, 2009, 26(1): 43-46.

Full-Text

comments powered by Disqus