Highway sight distance is a measure of roadway visibility, which is an important factor in the assessment of road safety. Greater visibility can provide motorists more time to avoid crashes and conflicts, facilitating safe and efficient operation. However, poor visibility can reduce the driver’s ability to react to changing conditions and is a significant factor in roadway crashes and near collisions. A driver’s ability to view ambient roadway conditions is necessary for safe operation of a vehicle. The roadway must have sufficient sight distance that drivers have the time to react to and avoid striking unexpected objects in their path. In addition, certain two-lane, two-way highways should also have adequate passing sight distance to enable drivers to use the opposing traffic lane for passing other vehicles without interfering with oncoming vehicles. This paper presents the concept and analysis of three different types of sight distance that are considered in highway geometric design based on AASHTO models: 1) the sight distances needed for stopping, applicable to all highway travels; 2) the sight distances needed for decisions at hazardous complex locations; and 3) the passing sight distance needed on two lane highways.
Cite this paper
Abdulhafedh, A. (2020). Highway Stopping Sight Distance, Decision Sight Distance, and Passing Sight Distance Based on AASHTO Models. Open Access Library Journal, 7, e6095. doi: http://dx.doi.org/10.4236/oalib.1106095.
AASHTO (2018) A Policy on Geometric Design of Highways and Streets. 7th Edition, The American Association of State Highway and Transportation Officials, Washington DC.
AASHTO (2011) A Policy on Geometric Design of Highways and Streets. 6th Edition, The American Association of State Highway and Transportation Officials, Washington DC.
AASHTO (2004) A Policy on Geometric Design of Highways and Streets. 5th Edition, The American Association of State Highway and Transportation Officials, Washington DC.
AASHTO (2001) A Policy on Geometric Design of Highways and Streets. 4th Edition, The American Association of State Highway and Transportation Officials, Washington DC.
Brown, R.L. and Hummer, J.E. (2000) Determining the Best Method for Measuring No-Passing Zones. Transportation Research Record No. 1701, TRB.
https://doi.org/10.3141/1701-08
Rose, E.R., Hawkins, H.G., Holick, A.J. and Bligh, R.P. (2004) Evaluation of Traffic Control Devices: First Year Activities. Texas Transportation Institute, The Texas A&M University System, College Station, TX.
Polus, A., Livneh, M. and Frischer, B. (2000) Evaluation of the Passing Process on Two Lane Rural Highways. Transportation Research Record, No. 1701, 53-60.
https://doi.org/10.3141/1701-07
Tsai, Y., Hu, Z. and Wang, Z. (2010) Vision-Based Roadway Geometry Computation. Journal of Transportation Engineering, 136, 223-233.
https://doi.org/10.1061/(ASCE)TE.1943-5436.0000073
Shaker, A., Yan, W.Y. and Easa, S. (2011) Construction of Digital 3D Highway Model Using Stereo IKONOS Satellite Imagery. Geocartography International, 26, 49-67. https://doi.org/10.1080/10106049.2010.537785
Ben-Arieh, D., Chang, S., Rys, M. and Zhang, G. (2004) Geometric Modeling of Highways Using Global Positioning System Data and B-Spline Approximation. Journal of Transportation Engineering, 130, 632-636.
https://doi.org/10.1061/(ASCE)0733-947X(2004)130:5(632)
Nehate, G. and Rys, M. (2006) 3D Calculation of Stopping-Sight Distance from GPS Data. Journal of Transportation Engineering, 132, 691-698.
https://doi.org/10.1061/(ASCE)0733-947X(2006)132:9(691)
Azimi, M. and Hawkins, H. (2013) Algorithm for Analyzing Horizontal Sight Distance from Lane Centerline Coordinates. Transportation Research Record, No. 2358, 12-19. https://doi.org/10.3141/2358-02
Kim, Y., Rana, S. and Wise, S. (2004) Exploring Multiple Viewshed Analysis Using Terrain Features and Optimization Techniques. Computers and Geosciences, 30, 1019. https://doi.org/10.1016/j.cageo.2004.07.008
Glennon, J.C. (1998) New and Improved Model of Passing Sight Distance on Two-Lane Highways. Transportation Research Record No. 1195. TRB, National Research Council, Washington DC.
Hassan, Y., Easa, S.M. and Abd El Halim, A.O. (1996) Passing Sight Distance on Two Lane Highways: Review and Revision. Transportation Research Part A, 30, 453-467. https://doi.org/10.1016/0965-8564(95)00032-1
Abdulhafedh, A. (2019) An Innovative GIS Method for Evaluating the Visibility of the Road Using the ArcMap-Tools. Open Access Library Journal, 6, e5586.
https://doi.org/10.4236/oalib.1105586
Berbel, D.C., Castro, M., Medina, L.C. and Maria, S.P.G. (2014) Sight Distance Studies on Roads: Influence of Digital Elevation Models and Roadside Elements. Procedia-Social and Behavioral Sciences, 160, 449-458.
https://doi.org/10.1016/j.sbspro.2014.12.157
Castro, M., Iglesias, L., Rodríguez-Solano, R. and Sánchez, J.A. (2006) Geometric Modelling of Highways Using Global Positioning System (GPS) Data and Spline Approximation. Transportation Research Part C—Emerging Technologies, 14, 233-243. https://doi.org/10.1016/j.trc.2006.06.004
Abdulhafedh, A. (2017) Identifying Vehicular Crash High Risk Locations along Highways via Spatial Autocorrelation Indices and Kernel Density Estimation. World Journal of Engineering and Technology, 5, 198-215.
https://doi.org/10.4236/wjet.2017.52016
Cai, H. and Rasdorf, W. (2008) Modeling Road Centerlines and Predicting Lengths in 3-D Using LIDAR Point Cloud and Planimetric Road Centerline Data. Computer-Aided Civil and Infrastructure Engineering, 23, 157-173.
https://doi.org/10.1111/j.1467-8667.2008.00518.x
Imran, M., Hassan, Y. and Patterson, D. (2006) GPS-GIS-Based Procedure for Tracking Vehicle Path on Horizontal Alignments. Computer-Aided Civil and Infrastructure Engineering, 21, 383-394.
https://doi.org/10.1111/j.1467-8667.2006.00444.x
