全部 标题 作者
关键词 摘要


Experimental Investigation of Visualization and Package of Phase Change Material for Thermal Management of 18650 Lithium-Ion Battery

DOI: 10.4236/oalib.1105035, PP. 1-10

Subject Areas: Electric Engineering, Mechanical Engineering

Keywords: Phase Change Material (PCM), Enhanced Heat Transfer, Phase Change Process, Visualization, Package

Full-Text   Cite this paper   Add to My Lib

Abstract

The visualization of phase change process of phase change material (PCM) for thermal management of 18650 lithium-ion battery was studied by experimental method. The configuration consists of a semi-cylindrical battery allocated in the center of a semi-concentric housing made of aluminum, composite PCM and a transparent plate of 3 mm thick made of acrylics. The results show that the composite PCM/copper foam has better thermal performance. Moreover, the leakage problem can be solved by encapsulating composite PCM into closed bags made of aluminum plastic film.

Cite this paper

Wu, Q. (2018). Experimental Investigation of Visualization and Package of Phase Change Material for Thermal Management of 18650 Lithium-Ion Battery. Open Access Library Journal, 5, e5035. doi: http://dx.doi.org/10.4236/oalib.1105035.

References

[1]  Putra, N., Ariantara, B. and Pamungkas, R.A. (2016) Experimental Investigation on Performance of Lithium-Ion Battery Thermal Management System Using Flat Plate Loop Heat Pipe for Electric Vehicle Application. Applied Thermal Engineering, 99, 784-789.
https://doi.org/10.1016/j.applthermaleng.2016.01.123
[2]  Ramadass, P., Haran, B., White, R., et al. (2002) Capacity Fade of Sony 18650 Cells Cycled at Elevated Temperatures: Part II. Capacity Fade Analysis. Journal of Power Sources, 112, 614-620.
https://doi.org/10.1016/S0378-7753(02)00473-1
[3]  Ping, P., Wang, Q., Huang, P., et al. (2014) Thermal Behaviour Analysis of Lithium-Ion Battery at Elevated Temperature Using Deconvolution Method. Applied Energy, 129, 261-273.
https://doi.org/10.1016/j.apenergy.2014.04.092
[4]  Lv, Y., Yang, X., Li, X., et al. (2016) Experimental Study on a Novel Battery Thermal Management Technology Based on Low Density Polyethylene-Enhanced Composite Phase Change Materials Coupled with Low Fins. Applied Energy, 178, 376-382.
https://doi.org/10.1016/j.apenergy.2016.06.058
[5]  Jiang, G., Huang, J., Liu, M., et al. (2017) Experiment and Simulation of Thermal Management for a Tube-Shell Li-Ion Battery Pack with Composite Phase Change Material. Applied Thermal Engineering, 120, 1-9.
https://doi.org/10.1016/j.applthermaleng.2017.03.107
[6]  Zhang, Z. and He, X. (2017) Three-Dimensional Numerical Study on Solid-Liquid Phase Change within Open-Celled Aluminum Foam with Porosity Gradient. Applied Thermal Engineering, 113, 298-308.
https://doi.org/10.1016/j.applthermaleng.2016.10.173
[7]  Wang, Z., Zhang, H. and Xia, X. (2017) Experimental Investigation on the Thermal Behavior of Cylindrical Battery with Composite Paraffin and Fin Structure. International Journal of Heat & Mass Transfer, 109, 958-970.
https://doi.org/10.1016/j.ijheatmasstransfer.2017.02.057
[8]  Lazrak, A., Fourmigué, J.F. and Robin, J.F. (2017) An Innovative Practical Battery Thermal Management System Based on Phase Change Materials: Numerical and Experimental Investigations. Applied Thermal Engineering, 128, 20-32.
https://doi.org/10.1016/j.applthermaleng.2017.08.172
[9]  Xiao, X., Zhang, P. and Li, M. (2014) Effective Thermal Conduc-tivity of Open-Cell Metal Foams Impregnated with Pure Paraffin for Latent Heat Storage. International Journal of Thermal Sciences, 81, 94-105.
https://doi.org/10.1016/j.ijthermalsci.2014.03.006
[10]  Yang, H., Zhang, H., Sui, Y., et al. (2018) Numerical Analysis and Experimental Visualization of Phase Change Material Melting Process for Thermal Management of Cylindrical Power Battery. Applied Thermal Engineering, 128, 489-499.
https://doi.org/10.1016/j.applthermaleng.2017.09.022
[11]  Shi, T., Fang, Y. and Zhang, H. (2015) Review on Shaped-Phase Change Material. Materials Review, S2, 437-439.
[12]  Wang, W., Zhang, X., Xin, C., et al. (2018) An Experimental Study on Thermal Management of Lithium Ion Battery Packs Using an Improved Passive Method. Applied Thermal Engineering, 134, 163-170.
https://doi.org/10.1016/j.applthermaleng.2018.02.011

Full-Text


comments powered by Disqus